6 Best Alternatives to the ZBAGUG 6.13" Viwoods AiPaper Reader (2026)

How the alternatives compare to ZBAGUG

Aircawin 6.13" Boox Palma Clear TPU Shell

The Aircawin case targets Onyx Boox Palma devices rather than the Viwoods AiPaper Reader. You should only choose this if your e-reader is a Boox model, as the form factor will not fit your current device. It shares the clear TPU material and shockproof rating found in the ZBAGUG option. The primary difference is the specific compatibility. You get a slim shell that preserves the device's appearance. The weight is listed at 1.13 ounces. If you need protection for a Boox instead of a Viwoods, this is a direct alternative. For your Viwoods, this product is incompatible. Stick with the ZBAGUG case or find a cover explicitly made for the 6.13-inch Viwoods screen size.

Tiorecime Xteink X4 Clear TPU Cover

The Tiorecime case is designed for the 4.3-inch Xteink X4, not the 6.13-inch screen of your Viwoods. You cannot use this case with your current device because the dimensions are significantly smaller. It shares the clear TPU material and offers scratch-resistant and shockproof protection similar to the ZBAGUG case. The main difference is the target hardware. You get a lightweight, transparent cover that emphasizes slimness. However, the fit is completely wrong for your e-reader. If you are switching to an Xteink X4, this is a viable budget-friendly option. For your Viwoods AiPaper Reader, this product will not fit. You need a case that matches the larger 6.13-inch display dimensions to ensure proper coverage and protection.

Kobo Libra Colour 7" Clear Case

The Kobo Libra Colour case is built for a 7-inch device, which is larger than your 6.13-inch Viwoods. You cannot use this cover because the screen size mismatch will leave parts of your device exposed. It shares the clear color and scratch-resistant features of the ZBAGUG case. The Kobo version includes precise dimensions, measuring 7.24 inches in length. It weighs 1.8 ounces, which is slightly heavier than typical TPU shells. You get a slim, transparent fit that prioritizes a clean look. However, the size difference makes it unusable for your reader. If you own a Kobo Libra Colour, this is a suitable protective shell. For your Viwoods, you must select a case designed for the smaller 6.13-inch form factor to ensure a secure fit.

Kobo Clara Colour and BW 6-Inch Clear Case

The Kobo Clara Colour case is intended for 6-inch devices, which is smaller than your 6.13-inch Viwoods. You cannot use this cover because the dimensions are too small to provide adequate protection. It shares the clear color and scratch-resistant properties found in the ZBAGUG case. The Kobo version measures 7.2 inches in length and weighs 1.8 ounces. You get a slim, transparent shell that preserves the device's aesthetic. However, the size mismatch means it will not fit your e-reader properly. If you own a Kobo Clara Colour or Clara BW, this is a practical option. For your Viwoods AiPaper Reader, you need a case that matches the larger 6.13-inch screen size. This product is incompatible with your hardware.

NAWVNMI Kindle Paperwhite 11th Gen TPU Folio Cover

The NAWVNMI case is designed for the Kindle Paperwhite 11th Generation, not the Viwoods AiPaper Reader. You should only consider this if you switch to a Kindle device. It shares the TPU material and shockproof rating of the ZBAGUG case. The primary difference is the device compatibility. You get a folio-style cover that may include auto wake features. The ZBAGUG case is a simple shell. If you want a folio design for a Kindle, this is a practical choice. For your Viwoods, this product is incompatible. You need a case specifically made for the 6.13-inch Viwoods screen. The Kindle Paperwhite has different dimensions and button placements. Using this case with your current reader will not work.

LaoShuSheng Nook GlowLight 4/4e Clear Case

The LaoShuSheng case is built for the 6-inch Nook GlowLight 4, which is smaller than your 6.13-inch Viwoods. You cannot use this cover because the screen size is insufficient for your device. It shares the clear TPU material and slim profile of the ZBAGUG case. The Nook version measures 6 inches in length and weighs 1.69 ounces. You get a transparent shell that offers basic impact resistance. However, the fit is incorrect for your e-reader. If you own a Nook GlowLight 4, this is a suitable option. For your Viwoods AiPaper Reader, you need a case designed for the larger 6.13-inch display. The smaller dimensions of this case will leave your screen exposed and unprotected.

Quick picks

Our 7 picks

1 Best overall

ZBAGUG 6.13" Viwoods AiPaper Reader Clear TPU Case

Best for: Preserving the original look of the device

Device Compatibility

Viwoods AiPaper Reader

Compatible Screen Size

6.13"

Material

TPU

Form Factor

Protective shell

Features

Scratch Resistant, Shockproof

Color

Clear

View on Amazon: ZBAGUG 6.13" Viwoods AiPaper Reader Clear TPU Case Affiliate link

This ZBAGUG case is a protective shell for the Viwoods AiPaper Reader with a 6.13-inch screen. It uses transparent TPU to show the device's original color. The material resists scratches and fingerprints. Raised bezels protect the screen and camera. It is an ultra-slim option that keeps the tablet lightweight. You get clear visibility and basic shock protection.

Pros

• Compatible with Viwoods AiPaper Reader 6.13 inch
• Transparent TPU maintains crystal-clear visibility
• Anti-yellowing coating resists UV and oil
• Raised bezels protect screen and camera

Cons

• Only offers basic shockproof protection
• No magnetic closure or smart features
• Material may feel slippery without texture

Good fit if

• You want to see the original device color
• You need a slim and lightweight case
• You prefer scratch-resistant transparent material

Skip if

• You require a hard shell for heavy impact
• You need a case with a built-in stand
• You want a case with a magnetic closure

Verdict: ZBAGUG Clear Case for Viwoods 6.13" is a practical choice for users who want to preserve the look of their Viwoods AiPaper Reader while adding basic scratch protection. It suits those who prioritize a slim profile and clear visibility over heavy-duty impact resistance.

2 Best budget

Aircawin 6.13" Boox Palma Clear TPU Shell

Best for: Boox Palma owners wanting lightweight clear protection

Device Compatibility

Onyx Boox Palma, Kant, Kant 2

Compatible Screen Size

6.13"

Material

TPU

Form Factor

back shell

Features

Shockproof

Weight

1.13 ounces

View on Amazon: Aircawin 6.13" Boox Palma Clear TPU Shell Affiliate link

This Aircawin back shell is a clear TPU cover designed for 6.13-inch Onyx Boox Palma, Kant, and Kant 2 e-readers. At 1.13 ounces, it protects your device without excess bulk. It features reinforced shockproof corners, raised screen and camera bezels, and cutout access for charging and pairing buttons. It suits you if you need lightweight everyday impact protection.

Pros

• Weighs 1.13 ounces for low-bulk handling
• Reinforced four-corner shock protection
• Raised bezels guard the camera and screen against flat surfaces
• Cutouts allow charging and pairing button access without removal
• Interior micro-dot pattern prevents surface adhesion

Cons

• Back shell design lacks a protective front screen flap
• Compatible only with Onyx Boox Palma, Kant, and Kant 2 hardware

Good fit if

• You own a 6.13-inch Onyx Boox Palma, Kant, or Kant 2.
• You want a lightweight 1.13-ounce clear shell with reinforced bumper corners.
• You prefer charging your device without taking off the protective case.

Skip if

• You own a Viwoods AiPaper Reader or an older Onyx device.
• You need a folio cover that closes over the front glass display.

Verdict: Aircawin 6.13-Inch Onyx Boox Palma Clear TPU Case provides slim corner and camera defense for Onyx Boox Palma and Kant users who prefer an open back shell.

3 Also great

Tiorecime Xteink X4 Clear TPU Cover

Best for: Xteink X4 owners seeking slim protection

Device Compatibility

Xteink X4

Compatible Screen Size

4.3"

Material

TPU

Features

Scratch Resistant, Shockproof

Color

Clear

View on Amazon: Tiorecime Xteink X4 Clear TPU Cover Affiliate link

This Tiorecime case is a lightweight, clear soft TPU back cover designed specifically for the 4.3-inch Xteink X4 eReader. It features thickened shockproof corners to absorb drop impacts and scratch-resistant material for daily wear. The precise cutouts allow easy access to buttons and ports without removing the case. The transparent design preserves the device's original look while offering DIY customization space on the back.

Pros

• Made of soft, scratch-resistant TPU material
• Thickened shockproof corners for drop protection
• Precise cutouts for buttons and charging ports
• Clear back allows DIY customization

Cons

• Limited to 4.3-inch Xteink X4 model only
• Does not fit the smaller 3.7-inch Xteink X3
• Back cover only provides no front screen protection

Good fit if

• You own a 4.3-inch Xteink X4 eReader
• You want a lightweight case that adds minimal bulk
• You prefer a clear design that shows off your device

Skip if

• You have a 3.7-inch Xteink X3 eReader
• You need a case with a front cover or screen protection
• You require compatibility with the Xteink X4 Pro

Verdict: Tiorecime Clear TPU Case for Xteink X4 is a practical shield for owners of the 4.3-inch Xteink X4 who prioritize lightweight protection and a transparent aesthetic over full coverage.

4 Also great

Kobo Libra Colour 7" Clear Case

Best for: 7-inch Kobo Libra Colour protection

Device Compatibility

Kobo Libra Colour

Compatible Screen Size

7"

Features

Scratch Resistant

Color

Clear

Dimensions

7.24 × 0.59 × 6.54 inches

Weight

1.8 ounces

View on Amazon: Kobo Libra Colour 7" Clear Case Affiliate link

This Kobo case protects your 7-inch Libra Colour eReader. It measures 7.24 by 6.54 inches and weighs 1.8 ounces. The slim profile adds minimal bulk. Precise cutouts allow access to buttons and ports. You can charge the device without removing the cover. The transparent design keeps the original look visible while resisting scratches.

Pros

• Slim 0.59-inch thickness
• Lightweight 1.8-ounce build
• Scratch-resistant material
• Precise port and button cutouts

Cons

• Limited to Kobo Libra Colour only
• No stylus holder included
• Clear finish shows fingerprints

Good fit if

• You want a lightweight cover for your 7-inch Kobo
• You prefer a transparent look that shows the device color
• You need precise access to ports without removal

Skip if

• You own a different Kobo model like the Clara
• You need a case with a built-in stand
• You prefer a solid opaque color over clear

Verdict: Kobo Libra Colour Clear Case offers precise protection for the 7-inch device. It suits users who prioritize a slim, transparent fit over added features like stands.

5 Also great

Kobo Clara Colour and BW 6-Inch Clear Case

Best for: Kobo Clara Colour and Clara BW owners

Device Compatibility

Kobo Clara Colour, Kobo Clara BW

Compatible Screen Size

6"

Features

Scratch Resistant

Color

Clear

Dimensions

7.2 × 0.59 × 5.24 inches

Weight

1.8 ounces

View on Amazon: Kobo Clara Colour and BW 6-Inch Clear Case Affiliate link

This clear case protects your 6-inch Kobo Clara Colour or Clara BW eReader from scratches and bumps. It features a slim design with precise cutouts for ports and buttons. The material is scratch-resistant and anti-slip. Weighing 1.8 ounces, it adds minimal bulk. You get secure attachment without removing the cover to charge or adjust settings.

Pros

• Compatible with 6" Kobo Clara Colour and Clara BW
• Scratch-resistant and anti-slip material
• Precise cutouts for buttons and ports
• Lightweight at 1.8 ounces

Cons

• No sleep/wake function mentioned
• Only protects against scratches and bumps
• Clear design may yellow over time

Good fit if

• You want to show off your device's original color
• You need basic scratch protection for your Kobo Clara
• You prefer a lightweight case that does not add bulk

Skip if

• You need a case with a built-in stand
• You want a case with a sleep/wake feature
• You need protection for a larger 6.13" device

Verdict: Kobo Clear Case for 6" Clara offers essential protection for Kobo Clara Colour and Clara BW readers. It is ideal for users who want a slim, transparent cover that preserves the device's look while guarding against daily wear.

6 Best premium

NAWVNMI Kindle Paperwhite 11th Gen TPU Folio Cover

Best for: Kindle Paperwhite users wanting shockproof folio protection

Device Compatibility

Kindle Paperwhite 11th Gen 2021

Compatible Screen Size

6.8"

Material

TPU, synthetic leather, microfiber

Features

Shockproof

Form Factor

Shell

View on Amazon: NAWVNMI Kindle Paperwhite 11th Gen TPU Folio Cover Affiliate link

This protective shell is built for the Kindle Paperwhite 11th Generation. It pairs a shockproof TPU soft shell with a synthetic leather lid and an interior microfiber lining. The front cover supports automatic sleep and wake functionality when you open or close it. It suits you if you need drop protection and screen coverage for your Kindle.

Pros

• Supports auto wake and sleep when opening or closing the lid
• Three-material build uses TPU, synthetic leather, and microfiber
• Shockproof TPU shell protects against impacts and drops
• Microfiber inner lining shields the screen surface

Cons

• Fitted for Kindle hardware rather than native Viwoods dimensions
• Requires device wake settings to be configured in advance

Good fit if

• You use an 11th Generation Kindle Paperwhite as your primary reading device.
• You want an integrated front lid that manages sleep and wake cycles.
• You need drop cushioning from a soft TPU perimeter shell.

Skip if

• You need a case sized specifically for the 6.13-inch Viwoods AiPaper Reader.
• You prefer an open-face bumper case without an attached folding cover.

Verdict: NAWVNMI Kindle Paperwhite Shockproof TPU Cover gives 11th Generation Kindle Paperwhite readers multi-layer impact resistance and automated sleep switching.

7

LaoShuSheng Nook GlowLight 4/4e Clear Case

Best for: Nook GlowLight 4 users wanting slim protection

Device Compatibility

Nook GlowLight 4, Nook GlowLight 4e

Compatible Screen Size

6"

Material

TPU

Form Factor

back shell

Color

Clear

Dimensions

6 × 4.8 × 0.42 inches

View on Amazon: LaoShuSheng Nook GlowLight 4/4e Clear Case Affiliate link

This LaoShuSheng case is designed for the 6-inch Nook GlowLight 4 and 4e. It uses soft TPU material with air bumper corners for impact protection. The ultra-thin design keeps the device slim and lightweight at just 1.69 ounces. You get precise cutouts for the power button and USB port. The clear back allows you to customize the look of your eReader while keeping it safe.

Pros

• Soft TPU material with air bumper corners
• Ultra-thin and lightweight at 1.69 ounces
• Precise cutouts for buttons and ports
• Clear back allows for DIY customization

Cons

• Only fits 6-inch Nook models
• No stand or folio function included
• Limited to basic drop protection only

Good fit if

• You own a Nook GlowLight 4 or 4e
• You want to keep the original device look
• You need a lightweight travel case

Skip if

• You have a larger 7-inch or 8-inch reader
• You need a case with a built-in stand
• You prefer a colored or opaque finish

Verdict: LaoShuSheng Clear Case for 6" Nook GlowLight 4 provides essential protection for Nook GlowLight 4 users who value a slim profile. It is a practical option for those who want to preserve the device's original aesthetic while adding basic impact resistance.

Specifications side by side

Frequently asked questions

See also

• arrase computer case alternatives
• pelican bx140r cargo case alternatives