Kepuglow 2-Pack Clear TPU Cases for XTEINK X3 Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Kepuglow's pack holds two clear TPU cases for the 3.7-inch XTEINK X3. Kepuglow says each uses 30% more TPU than similar cases, making it softer to fit and thicker at the reinforced corners, and that cutouts keep the buttons, charging port and card slot open. The listing weight is 0.59 ounces. The point of the pack is the second case: keep it as a spare when the first gets scuffed or yellows. Kepuglow sells the same two-pack for the 4.3-inch X4 at the same price, so check which reader you have. Our verdict: an easy, cheap way to protect the tiny X3's edges for a long time; it leaves the screen open, like every shell of this kind. Based on Kepuglow's listing.
What stands out
- XTEINK X3 3.7" only
- Two cases per pack
- Reinforced corners
- Card slot cutout
- 0.59 oz
Who it fits
Good fit for
XTEINK X3 owners who want corner protection and a spare case at a low price.
Who should skip it
Skip it if you have the X4 (buy Kepuglow's X4 pack) or want the screen covered.
Verdict: Two decent shells for the price of one elsewhere.
Kepuglow X3 pack specs
XTEINK X3 3.7-inch
X4 version sold separately.
Two clear TPU cases
One to use, one spare.
30% more TPU (maker's claim)
Softer flex, thicker corners.
Cutouts for buttons, port, card slot
No need to remove it.
0.59 oz
Light for a small reader.
Design
Each case is a clear flexible TPU shell with strengthened corners and full-edge coverage. Kepuglow shapes it around the X3's controls rather than using a generic size. The front is open; Kepuglow notes it adds protection without the bulk of a folio.
Daily carry
The X3 is small enough for a shirt pocket, and a TPU shell adds grip for one-handed reading on a commute. When the first case gets dirty or loose, swap in the spare. The card slot cutout means you can change storage cards with the case on.
Kepuglow two-pack or a carry bag
Choose Kepuglow's X3 pack if you want edge and corner protection with a spare. Choose ALKOO's padded storage bag if you carry the reader with a cable and earbuds and want everything in one pouch. Owners of the X4 should pick Kepuglow's X4 two-pack or LYONGZP's single X4 shell.
Check before you buy
- Reader is an XTEINK X3
- A spare case is useful
- Open screen is fine
- Clear look suits you
The product at a glance
Kepuglow XTEINK X3 3.7" Clear Case 2-Pack
Best for: XTEINK X3 owners
- Device Compatibility
- XTEINK X3
- Compatible Screen Size
- 3.7"
- Material
- TPU
- Form Factor
- Back cover
- Weight
- 0.59 ounces
View on Amazon: Kepuglow XTEINK X3 3.7" Clear Case 2-Pack Affiliate link
Kepuglow two-pack of clear TPU cases for the 3.7" XTEINK X3: reinforced corners, cutouts for buttons, port and card slot, 0.59 oz, one spare.
Pros
- Two cases per pack
- Reinforced corners
- Card slot cutout
Cons
- Screen left open
- X3 only
- 30% claim unverified
Good fit if
- You want an X3 shell with a spare
Skip if
- You own the X4
Verdict: Good value for the tiny X3.
Specifications side by side
| Spec | Kepuglow XTEINK X3 3.7" Clear Case 2-Pack |
|---|---|
| Device Compatibility | XTEINK X3 |
| Compatible Screen Size | 3.7" |
| Material | TPU |
| Form Factor | Back cover |
| Screen Size | 7" |
| Weight | 0.59 ounces |
| Size | for Xteink X3 3.7" |
| Color | For Xteink X3 - 2 Pack |
If you are weighing a similar two-pack screen protector, our uyrie 2 pack review lays out its published specs so you can compare them side by side.
Frequently asked questions
Does the Kepuglow X3 case fit the XTEINK X4?
No, Kepuglow sells a separate two-pack for the 4.3-inch X4.
How many cases are in the Kepuglow pack?
Two clear TPU cases.
Can I reach the X3 card slot with the Kepuglow case on?
Yes, there is a cutout for the card slot.
How much does a Kepuglow X3 case weigh?
0.59 ounces as listed.
Does the Kepuglow case cover the X3 screen?
No, it protects the back, edges and corners.
